Aluminium, Steel, or Plastic
Aluminium, Steel, or Plastic: The Material Decision
Aluminium, steel, or plastic? The material decides the cost, the weight, the heat, the EMI, and whether the product survives outdoors, and the wrong one fails in under two years. Three axes, four plastics, three metals, and the arithmetic for Example Labs' field sensor hub.
Example Labs is a made-up company we use for worked examples.
Picture the hub. Example Labs' field sensor hub, 100 × 60 × 40 mm, from Articles #6 and #7, has to live outdoors, on a fence post, for five years. It has a BLE radio at 2.4 GHz, a battery that cannot get hot, and a board that fails EMC if the box leaks. The enclosure is the part of the product that decides all three. And the material is the decision that decides the enclosure.
The buyer picked ABS. It was the cheapest quote, 30% cheaper than the stainless option, and the purchasing manager's KPIs were met. In less than two years, the plastic severely powdered and cracked under high-intensity ultraviolet radiation and salt spray, and rainwater backflow burned out the internal inverter.
The initial 30% savings in the procurement budget led to tens of thousands of dollars in equipment damage claims. That is not a hypothetical. That is an EPC contractor's coastal photovoltaic project, published by the enclosure maker BSUMwell, and in their TCO analysis of the same failure, more than half of 200 plastic casings showed severe powdering and cracking within two years, and the claims, replacements, and downtime losses combined amounted to several times the money saved on the initial purchase price.
The material is not a line item. It is a decision about where the product lives, what it transmits, and how many of them you are making, and the wrong answer fails in under two years, in the open, where everyone can see it.
The three axes: the decision before the material
Electronic enclosure material selection follows three axes: indoor vs outdoor environment, wireless signal transmission vs EMI shielding, and prototype vs production volume. (Fabcon) Three decision axes turn material data into an enclosure choice that fits the program. Property lists alone do not resolve that decision.
Axis 1: indoor vs outdoor. UV exposure, moisture, chemical splash, and temperature cycling eliminate certain materials and impose grade-level requirements on others. The grade, the stabilization package, and the verified weathering classification determine outdoor suitability, so a material name alone does not specify the part. "Polycarbonate" is not a specification. "UV-stabilized polycarbonate, f1 rated" is. The f1 rating, under the outdoor polymeric materials standard, indicates suitability for outdoor use with or without exposure to water and UV. An f2 rating indicates suitability only when sheltered from direct UV and water, and an f2-rated material can legitimately be labeled "outdoor rated" on a datasheet. (Fabcon, via Camden Boss) A UL 94 rating is meaningless without its stated thickness: a flame-retardant polycarbonate grade may achieve V-2 at one thickness and V-0 at a greater thickness.
Axis 2: wireless vs shielding. Metal enclosures attenuate wireless signals. Plastic enclosures provide negligible EMI shielding unless coated with a continuous, grounded conductive layer. These requirements conflict in a single unmodified material, so the wireless or shielding requirement must be stated before a material is chosen. (Fabcon) This is the axis that decides the hub: the BLE radio at 2.4 GHz needs to get out, and the board needs shielding to pass EMC. One material cannot do both. The decision is which requirement the enclosure serves, and how the other one is handled, an external antenna, a plastic window, a coated lid, before the material is chosen.
Axis 3: prototype vs production volume. Material choice constrains fabrication route, and fabrication route carries tooling economics that shift with volume. A material that works at prototype quantities may require tooling investment that only becomes practical at production scale. Volume belongs in the material conversation from the start. (Fabcon) Sheet metal fabrication is the flexible route for prototypes and low-to-mid volumes, because laser cutting and press-brake forming require minimal or no custom tooling, and the same production alloy, thickness, machines, and tolerances can often be used from prototype through production. Injection molding becomes favorable once a project passes the 500-unit mark, because the fixed mold cost is divided across more parts, and below that threshold, CNC machining or sheet metal subassemblies often avoid uneconomic tooling. Die casting supports high-volume metal production above roughly 5,000 pieces, but must contend with porosity, shrinkage, and post-machining requirements. (Fabcon)
The plastics: polycarbonate, ABS, PC/ABS, and FRP
Plastics support wireless signal transparency, electrical insulation, weight reduction, and molded geometry. The four most common enclosure plastics differ in outdoor durability, thermal ceiling, and chemical resistance. (Fabcon)
Polycarbonate suits impact resistance and outdoor durability when UV-stabilized grades are specified. Compared with ABS, polycarbonate offers substantially higher impact strength, with notched Izod impact of 600–900 J/m versus roughly 200–400 J/m for ABS, two and a half times tougher at the midpoints (750 vs. 300 J/m), and 1.5–4.5× across the ranges. It also provides a higher heat deflection temperature. These properties make polycarbonate a strong choice for enclosures that must survive drops, impacts, or elevated service temperatures. Compared with aluminum, polycarbonate is RF-transparent, which suits enclosures that house a wireless radio, gateway, or sensor. (Fabcon) Its failure mode is UV degradation and yellowing in unstabilized grades: standard, non-UV-stabilized polycarbonate begins showing meaningful surface degradation within 12–24 months of full outdoor exposure in temperate climates, faster in high-UV regions. And polycarbonate is notch-sensitive and stress-cracks on contact with alkalis, aromatic solvents, and chlorinated solvents, so compatibility data must be screened before specification. (Fabcon) A notch is a sharp inside corner, a scratch, a drilled hole with no radius, and a notched polycarbonate part that would survive a drop unnotched will crack at the notch, in the solvent, in the field.
ABS suits cost-sensitive indoor enclosures. Its failure mode is photo-oxidative degradation of the butadiene phase outdoors, which appears as chalking, yellowing, and embrittlement. An ABS part that looks perfect indoors can show visible yellowing after a few months of outdoor exposure. Within one to two years, unprotected ABS in direct sunlight can suffer surface cracking, embrittlement, and loss of impact strength. UV damage is surface-driven, and the degraded surface layer acts as a stress concentrator that can precipitate bulk mechanical failure. (Fabcon) ABS suits prototypes, lab instruments, and light industrial builds in controlled environments. Outdoor service requires a verified UV-stabilized grade, a protective coating, or an ASA cap layer. The coastal PV case is the ABS failure, in the open: ordinary ABS, coastal sun and salt spray, under two years, powdered and cracked, rainwater in, inverter out.
PC/ABS suits indoor applications that need a balance of impact strength and moldability. Its failure mode is environmental stress cracking under load and poor weathering without a stabilized grade or coating. PC/ABS FR has poor UV and weathering resistance, so it fits indoor enclosures unless a UV-stabilized grade, protective coating, or sheltered installation is qualified. The blend processes at a lower melt temperature than straight polycarbonate, which enables better flow, thinner walls, and faster cycles, and it gives up roughly 15–30 °C of heat deflection temperature relative to straight PC. For parts rated above approximately 115 °C, polycarbonate is favored. (Fabcon)
FRP (glass-fiber-reinforced polyester, typically SMC or BMC) suits chemical and corrosion resistance in harsh environments. Its failure modes are lack of inherent EMI shielding and surface fiber bloom under prolonged UV, the glass fibers showing through the surface as the resin weathers away. FRP has broad resistance to acids, oils, greases, and many industrial chemicals, but enclosure makers' resistance tables disagree for strong alkalis, so compatibility must be checked for the specific resin, concentration, temperature, and exposure time. FRP is approximately five times stiffer than polycarbonate, so large doors and walls flex less under load. Like polycarbonate, FRP is RF-transparent, which supports outdoor metering and EV charging infrastructure where metal would introduce corrosion or galvanic concerns. (Fabcon) Bud Industries adds the working numbers: fibreglass has high impact strength and rigidity, a superior working temperature of −31 °F to 300 °F, good moisture and chemical resistance, and it tends to be more expensive than polycarbonate but less expensive than other corrosion-resistant boxes.
The metals: aluminium, stainless steel, and galvanized steel
Plastics address signal transparency and insulation. When EMI shielding, heat dissipation, structural rigidity, or long service life in corrosive environments is required, metals become the default choice. The three most common enclosure metals differ in thermal performance, corrosion resistance, weight, and cost. (Fabcon)
Aluminium (6061 and 5052 grades) suits heat dissipation and EMI shielding with light weight. Its trade-off is blocking wireless signals and presenting an insulating native oxide or anodize layer at bond faces. The thermal numbers are the reason to choose it: 6061-T6 aluminium has a thermal conductivity of approximately 167 W/m·K, versus 16 W/m·K for both 304 and 316 stainless steel, a roughly 10× difference that supports heat spreading in enclosure walls. In a hot indoor cabinet, the difference between an aluminium body acting as part of the thermal path and a steel body insulating the electronics is often 10 to 15 °C on component case temperature. For EMI shielding, anodizing on aluminium is an electrical insulator that breaks bonding continuity. Bond faces must be masked before anodizing or machined afterward to expose bare metal. Weight is the other trade-off: aluminium is roughly two-thirds lighter than steel, which matters for rack-mounted and portable enclosures. Compared with polycarbonate, aluminium provides inherent EMI shielding and heat spreading but blocks wireless signals, so the system must resolve that trade-off before material selection. (Fabcon) Bud Industries adds the shop-floor view: die-cast aluminium, when molded, can be impact resistant; their die-cast material is ADC-12, and their aluminium chassis, panels, and rackmounts use 3003-H14.
Stainless steel (304 and 316 grades) suits corrosion resistance in marine and chemical environments. Its trade-offs are weight, cost, and low thermal conductivity relative to aluminium. 304 and 316 stainless steel share identical mechanical properties, with 205 MPa yield and 515 MPa ultimate strength, the choice between them is driven by corrosion resistance rather than structural or thermal performance. 316 stainless contains roughly 2% molybdenum, which improves chloride pitting resistance. This makes 316 suitable for marine, brine, or chlorinated environments, while 304 suits dry indoor, food-grade non-saline, or cost-sensitive service. Because stainless steel conducts heat at approximately 16 W/m·K, stainless enclosures for high-heat electronics must rely on dedicated conduction paths, external heat sinks, ventilation, or forced cooling rather than the enclosure wall. (Fabcon) The lifespan is the reason to pay for it: 316 stainless steel, containing molybdenum, has the strongest resistance to chloride ion corrosion and requires no maintenance for over 20 years. 304 suits areas more than 2 kilometres from the coastline. (BSUMwell) Bud Industries puts it in one line: the corrosion resistance comes from the nickel composition.
Galvanized steel suits cost-effective structural enclosures with corrosion protection. Its trade-offs are finishing compatibility, including zinc peeling at tight bend radii, and the need to mask conductive zones before coating. Galvanized steel suits enclosures exposed to humidity or outdoors because its zinc coating provides corrosion resistance, but if the bend radius is too small relative to the zinc coating thickness, the zinc can peel at bend lines and expose bare oxidizing steel at seam contact points. Galvanized steel is rated as excellent for shielding because its zinc coating adds corrosion protection while maintaining surface conductivity. For most telecom cabinet and outdoor industrial applications, galvanized steel with powder coat handles many climates, with stainless reserved for coastal or chemically aggressive sites. (Fabcon) Article #30's sheet-metal numbers are the process behind it: the K-factor is 0.3–0.5 and is not a material constant; the bend allowance is BA = A × (R + K × T); the minimum flange is ≥4× thickness; and 6061-T6 needs 1.5–3× thickness inside bend radius as the working rule.
Metal is required when EMI shielding or heat dissipation through the enclosure wall is a design requirement. Plastic enclosures provide negligible EMI shielding without a continuous, grounded conductive coating, and engineering polymers conduct heat at roughly 300–650 times less than aluminium. When wireless signal transparency is required, plastic suits the need.
The wireless vs shielding axis resolves this question before any other property is evaluated. (Fabcon) DigiKey states the same split in one line: non-metallics are permeable by radio frequency waves and make a good choice for wireless communication devices that need to easily send and receive signals, and on the other side of the coin, this feature can be detrimental if the device needs to be kept isolated from electromagnetic interference.
Metal-to-metal contact is essential for full shielding, as well as grounding.
The cost and the weight: what the multiples actually mean
The cost multiples are BSUMwell's, from their product line: PC/ABS plastic 1× (the benchmark, injection molding, lowest unit price for bulk orders), aluminium approximately 1.5–2× (aluminium profiles/die casting, medium cost), stainless steel approximately 2–3× (the highest cost, for materials and processing). Plastic is the cheapest; stainless steel is the most expensive. (BSUMwell) The weight multiples from the same source are PC/ABS 1× (lightest, the frame has minimal load-bearing requirements and can be moved by a single person), aluminium approximately 1.5× (lightweight, suitable for pole/high-altitude installation), stainless steel approximately 3× (the support structure needs to be reinforced, which may require hoisting equipment).
Bud Industries' weight comparison is the same-geometry version, and it lands a little differently: if a polycarbonate object weighs 1 pound, a similar fibreglass object would weigh about 1.5 pounds, aluminium 2 pounds, and steel 6 to 7 pounds. (Bud Industries) The two sources disagree on aluminium, 1.5× against 2×, because they are measuring different things: BSUMwell's multiples are for their product line, where the aluminium wall can be thinner than the plastic wall; Bud's are for the same object in different materials.
The article uses Bud's same-geometry ratios for the demo, and BSUMwell's cost multiples for the price, and says which is which.
The selection summary, from BSUMwell: Coastal/Chemical → stainless steel 316; Outdoor → PC/ABS plastic (UV resistant); High-heat → aluminium; Corrosion-resistant and lightweight → aluminium (ocean-grade coating). The scenario guide adds the distances and the lifetimes: 316 stainless steel is the first choice for coastal, and it needs no maintenance for over 20 years; aluminium requires a marine-grade recoating of at least 120 µm, and takes precautions against scratches during installation; PC/ABS requires a high-level UV protection formula and suits areas more than 5 kilometres from the coastline.
PC/ABS shells can last 10–15 years in normal outdoor environments, but in the organic solvent vapour environment of chemical plants, they may stress crack after 6 months. And the pitfall, stated as a pitfall: replacing UV-resistant PC with ordinary ABS, coastal environments will cause the material to crumble and crack within 1–2 years. (BSUMwell)
The tooling is the third cost, and it is the one that decides the volume axis. A fully custom injection-molded enclosure costs around $50,000 in tooling and takes months to validate; a modified standard enclosure costs less than $5,000 and was ready for production in 10.5 weeks. (Design News, on PacTec's modular injection-molding tools) The published industry estimates put injection mold tooling at $3,000 to $15,000 for aluminium and $20,000 to $100,000 or more for steel, with tool samples 4 to 8 weeks after design sign-off.
(Inventornest) The pipeline's Bud Industries figure for tooling modifications, $5,000 to $40,000 depending on size and complexity, was not re-confirmed in this round, and the article does not use it; the verified alternatives above are used instead. The tooling cost is a fixed, one-time investment that converts variable per-unit cost into a declining cost curve, and a DFM review before any tooling commitment offers strong cost-control leverage. (Fabcon) Article #16's numbers are the reason: design determines 70–80% of final part cost and quality before production, and ~70% of first-submission designs contain at least one feature causing a defect or forcing an expensive mould action.
Example Labs' field sensor hub, in four materials
Example Labs' field sensor hub, 100 × 60 × 40 mm, from Articles #6 and #7, goes on a fence post outdoors, for five years, with a BLE radio at 2.4 GHz and 5 W of heat inside. Here is the material decision, with the arithmetic run in Python before writing.
Step 1, the weight. The enclosure shell, at a 2 mm wall: surface area 24,800 mm², shell volume 49.6 cm³. In polycarbonate (density 1.2 g/cm³, the article's own assumption, labelled), the shell weighs 59.5 g. In aluminium (2.7 g/cm³), 133.9 g. In steel (7.85 g/cm³), 389.4 g. The ratios, aluminium 2.25×, steel 6.54×, land on Bud Industries' same-geometry figures (2× and 6–7×). On a fleet of 1,000 hubs: polycarbonate 60 kg of enclosure, aluminium 134 kg, steel 389 kg, the steel fleet carries 330 kg more than the polycarbonate fleet, on the same 1,000 hubs, for the same box. The weight is not a line item. It is the pole, the bracket, the installer, and the shipping.
Step 2, the heat. Article #7's first-order calc: 5 W in the sealed box, 0.025 m² of surface, gives a rise of ~25 °C, 65 °C inside at 40 °C ambient. The material does not fix that rise, because the rise is convection-limited: the wall's conduction drop is 2.0 °C for polycarbonate and 0.002 °C for aluminium (the article's own arithmetic, using Fabcon's 167 W/m·K for aluminium and 16 W/m·K for stainless, and a standard 0.2 W/m·K for polycarbonate, labelled). The wall is not the bottleneck. The material's real thermal job is spreading the heat across the wall so the whole surface convects, and that is where Fabcon's numbers bite: engineering polymers conduct heat at roughly 300–650 times less than aluminium, and in a hot indoor cabinet, the difference between an aluminium body acting as part of the thermal path and a steel body insulating the electronics is often 10 to 15 °C on component case temperature. The decision is not "which material sheds the 5 W." It is "does the wall carry heat to a heatsink, or does it insulate the board from the air", and Article #35's heatsink is the part that answers it, with Tj = Ta + P × θJA and a design target 20–30 °C below the absolute maximum.
Step 3, the radio. The hub's BLE radio is at 2.4 GHz. From Article #34: the wavelength is 124.9 mm, the quarter-wave is 31.2 mm, the TI reference IFA is 25.7 × 7.5 mm with a gain of +3.3 dBi, and the keep-out is 5–8 mm beyond the antenna perimeter. In a polycarbonate box, the radio sees the world: polycarbonate is RF-transparent. In an aluminium box, the radio is inside a metal cage, the metal attenuates the signal, and the 31.2 mm antenna has no path out. The fix is not a stronger radio. It is a hybrid: an aluminium base for heat and shielding, a polycarbonate lid for the antenna, or an external antenna through a bulkhead connector, selected the way Article #46 selects it (30 µin of gold over nickel, screw-locked, for the field-service port). The material decision is the wireless decision, made before the material is chosen.
Step 4, the cost, and the coastal case. The enclosure is $10 in PC/ABS, the article's own assumption, labelled. At BSUMwell's multiples, aluminium is $15–$20 and stainless steel is $20–$30. On a fleet of 1,000 hubs: PC/ABS $10,000, aluminium $15,000–$20,000, stainless $20,000–$30,000. The 30% saving on the PC fleet is $3,000. The coastal case says what the $3,000 buys: more than half of 200 casings powdered and cracked in under two years, and the claims, replacements, and downtime losses combined amounted to several times the money saved. On Example Labs' 1,000 hubs, at the coastal case's failure rate, 500+ enclosures fail, and the replacement enclosures alone are $5,000, before the inverter damage, the battery damage, and the field visits. The saving is $3,000. The replacement is $5,000. The damage is tens of thousands. The arithmetic is not close, and it is not supposed to be.
Step 5, the volume. The tooling is the fixed cost, and the volume divides it. A $10,000 aluminium mould is $100 a hub at 100 units, $10 a hub at 1,000, and $1 a hub at 10,000. A $3,500 mould (Central Coast's worked example) is $35, $3.50, and $0.35. A $50,000 fully custom tool is $500, $50, and $5. Fabcon's threshold is the rule: injection moulding becomes favorable once a project passes the 500-unit mark; below that, CNC machining or sheet metal subassemblies often avoid uneconomic tooling. Example Labs' 1,000-hub fleet is past the mark, injection moulding is favorable. At 100 units, the sheet-metal aluminium box is the route: no tooling, same alloy and thickness from prototype through production. At 10,000 units, die casting enters, above roughly 5,000 pieces.
The decision test
Five questions. If you can answer all five, the material is selected. If you cannot, the material was picked from the catalogue.
- Where does it live, indoor or outdoor, and how far from the coast? UV-stabilized polycarbonate, f1 rated, for outdoor. Ordinary ABS crumbles and cracks within 1–2 years on the coast. PC/ABS needs a high-level UV formula and suits areas more than 5 km from the coastline; 304 suits areas more than 2 km; 316 is the first choice for the coast, and needs no maintenance for over 20 years. If the answer is "outdoors" with no distance and no grade, the material is not specified.
- What does it transmit, and what does it need to block? Metal attenuates wireless signals; plastic provides negligible EMI shielding unless coated with a continuous, grounded conductive layer. If the hub has a BLE radio and the box is aluminium, the radio is in a cage. If the board needs shielding and the box is plastic, the shielding is a coating that must be continuous and grounded. State the wireless requirement before the material.
- How hot does it get, and does the wall carry heat or insulate? Aluminium at 167 W/m·K vs. stainless at 16 W/m·K, a 10× difference, and 10–15 °C on component case temperature in a hot cabinet. Engineering polymers conduct heat 300–650× less than aluminium. If the wall is the thermal path, the material is aluminium. If the wall insulates, the heat needs a heatsink, a vent, or forced cooling, not a different plastic.
- How many are you making, and what does the tooling cost per unit? Injection moulding is favorable past 500 units; die casting above ~5,000; sheet metal needs minimal or no custom tooling and runs the same route from prototype through production. A $10,000 mould is $100 a hub at 100 units and $1 at 10,000. If the volume is uncertain, sheet metal is the default route.
- What fails first, and what does the failure cost? ABS outdoors: chalking, yellowing, embrittlement, 1–2 years. Unstabilized PC: surface degradation in 12–24 months. PC/ABS in chemical-plant solvent vapour: stress cracks in 6 months. The coastal case: 30% saved, tens of thousands claimed. If the failure mode is not named, the material was chosen on price.
Objections
"Plastic is cheaper." Plastic is cheaper to buy. The PC/ABS enclosure is 1×, aluminium is 1.5–2×, stainless is 2–3×, and the coastal case saved 30% on procurement and paid tens of thousands in damage claims, several times the money saved. The initial purchase price is the tip of the iceberg: installation, maintenance, replacement, downtime, and safety risks sit behind it. Plastic cannot be repaired once it ages; it must be replaced. Stainless steel requires virtually no maintenance. The cheapest enclosure is the one that does not fail.
"Aluminium is the safe choice, it does everything." Aluminium does heat and shielding and light weight, and it blocks the radio. The hub's BLE antenna at 2.4 GHz has no path out of an aluminium box, and the fix is a plastic lid, a plastic window, or an external antenna, which means the material decision is a hybrid decision, not an aluminium decision. Aluminium also presents an insulating native oxide or anodize layer at bond faces: for EMI shielding, the bond faces must be masked before anodizing or machined afterward to expose bare metal. The safe choice is the one that states the wireless requirement first.
"Stainless steel is overkill, we're not on the coast." Stainless is overkill until the product is installed 2 km from the coastline, or in a chemical plant, or in a washdown environment, or anywhere the enclosure is cleaned with a chlorinated solvent. The choice between 304 and 316 is driven by corrosion resistance, not structure: they share 205 MPa yield and 515 MPa ultimate, and 316's 2% molybdenum is what buys the chloride pitting resistance. The question is not whether the product is on the coast. It is whether the product will ever be cleaned, splashed, or installed somewhere the map did not predict.
"We'll just use the standard enclosure, it's already certified." The standard enclosure is certified as it ships. Bud Industries states it plainly: their enclosures are only truly UL rated when they are in the original designated form, and any additional cutouts or shifts in material could cause you to have to recertify the product. A standard box with a hole cut for the antenna is not a certified box with a hole. It is a modified box, and the modification is yours.
"The material doesn't matter, the IP rating does." The IP rating is a test on a new enclosure in a laboratory, and Article #7's numbers are the reason the material matters more: IPX5 is 12.5 L/min at ~30 kPa, IPX6 is 100 L/min at ~100 kPa, IPX7 is immersion to 1 m for 30 minutes, and above IPX6 the water digits are separate tests, not a ladder. The gasket loses ~20% of its sealing after 2 years of temperature cycling. The ABS box that passed IP67 on day one powdered and cracked in under two years, and the rainwater came in through the cracks. The IP rating says the box was sealed. The material says whether it stays sealed.
Sources
- Fabcon, "Electronic Enclosure Materials: A Selection Guide" (last updated 11 November 2026)
What we used
"Electronic enclosure material selection follows three axes: indoor vs outdoor environment, wireless signal transmission vs EMI shielding, and prototype vs production volume." "Axis 1: Indoor vs Outdoor Environment. UV exposure, moisture, chemical splash and temperature cycling eliminate certain materials and impose grade-level requirements on others. The grade, stabilization package and verified weathering classification determine outdoor suitability, so a material name alone does not specify the part." "Axis 2: Wireless Signal Transmission vs EMI Shielding. Metal enclosures attenuate wireless signals. Plastic enclosures provide negligible EMI shielding unless coated with a continuous, grounded conductive layer. These requirements conflict in a single unmodified material, so the wireless or shielding requirement must be stated before a material is chosen." "Axis 3: Prototype vs Production Volume. Material choice constrains fabrication route, and fabrication route carries tooling economics that shift with volume. A material that works at prototype quantities may require tooling investment that only becomes practical at production scale. Volume belongs in the material conversation from the start." "Polycarbonate suits impact resistance and outdoor durability when UV-stabilized grades are specified. Its failure mode is UV degradation and yellowing in unstabilized grades. Standard, non-UV-stabilized polycarbonate begins showing meaningful surface degradation within 12–24 months of full outdoor exposure in temperate climates, faster in high-UV regions. The verified outdoor-suitability line is the f1 rating under the outdoor polymeric materials standard." "Polycarbonate is notch-sensitive and stress-cracks on contact with alkalis, aromatic solvents and chlorinated solvents, so compatibility data must be screened before specification." "Compared with ABS, polycarbonate offers substantially higher impact strength with notched Izod impact of 600–900 J/m versus roughly 200–400 J/m for ABS. It also provides a higher heat deflection temperature." "ABS suits cost-sensitive indoor enclosures. Its failure mode is photo-oxidative degradation of the butadiene phase outdoors, which appears as chalking, yellowing and embrittlement. Within one to two years, unprotected ABS in direct sunlight can suffer surface cracking, embrittlement and loss of impact strength. UV damage is surface-driven, and the degraded surface layer acts as a stress concentrator that can precipitate bulk mechanical failure." "PC/ABS suits indoor applications that need a balance of impact strength and moldability. Its failure mode is environmental stress cracking under load and poor weathering without a stabilized grade or coating. PC/ABS FR has poor UV and weathering resistance, so it fits indoor enclosures unless a UV-stabilized grade, protective coating or sheltered installation is qualified. The blend processes at a lower melt temperature than straight polycarbonate. PC/ABS gives up roughly 15–30 °C of heat deflection temperature relative to straight PC. For parts rated above approximately 115 °C, polycarbonate is favored." "FRP (glass-fiber-reinforced polyester, typically SMC or BMC) suits chemical and corrosion resistance in harsh environments. Its failure modes are lack of inherent EMI shielding and surface fiber bloom under prolonged UV. FRP is approximately five times stiffer than polycarbonate, so large doors and walls flex less under load. Like polycarbonate, FRP is RF-transparent, which supports outdoor metering and EV charging infrastructure where metal would introduce corrosion or galvanic concerns." "Aluminum (6061 and 5052 grades) suits heat dissipation and EMI shielding with light weight. Its trade-off is blocking wireless signals and presenting an insulating native oxide or anodize layer at bond faces. 6061-T6 aluminum has a thermal conductivity of approximately 167 W/m·K, versus 16 W/m·K for both 304 and 316 stainless steel, a roughly 10x difference that supports heat spreading in enclosure walls. In a hot indoor cabinet, the difference between an aluminum body acting as part of the thermal path and a steel body insulating the electronics is often 10 to 15 °C on component case temperature. For EMI shielding, anodizing on aluminum is an electrical insulator that breaks bonding continuity. Bond faces must be masked before anodizing or machined afterward to expose bare metal. Aluminum is roughly two-thirds lighter than steel, which matters for rack-mounted and portable enclosures." "Stainless steel (304 and 316 grades) suits corrosion resistance in marine and chemical environments. Its trade-offs are weight, cost and low thermal conductivity relative to aluminum. 304 and 316 stainless steel share identical mechanical properties, with 205 MPa yield and 515 MPa ultimate strength. 316 stainless contains roughly 2% molybdenum, which improves chloride pitting resistance. Because stainless steel conducts heat at approximately 16 W/m·K, stainless enclosures for high-heat electronics must rely on dedicated conduction paths, external heat sinks, ventilation or forced cooling rather than the enclosure wall." "Galvanized steel suits cost-effective structural enclosures with corrosion protection. Its trade-offs are finishing compatibility, including zinc peeling at tight bend radii, and the need to mask conductive zones before coating. Galvanized steel is rated as excellent for shielding because its zinc coating adds corrosion protection while maintaining surface conductivity. For most telecom cabinet and outdoor industrial applications, galvanized steel with powder coat handles many climates, with stainless reserved for coastal or chemically aggressive sites." "Metal is required when EMI shielding or heat dissipation through the enclosure wall is a design requirement. Plastic enclosures provide negligible EMI shielding without a continuous, grounded conductive coating, and engineering polymers conduct heat at roughly 300–650 times less than aluminum." "Sheet metal fabrication is generally a flexible enclosure route for prototypes and low-to-mid volumes because laser cutting and press-brake forming require minimal or no custom tooling, and the same production alloy, thickness, machines and tolerances can often be used from prototype through production." "Injection molding is the natural route for ABS, polycarbonate and PC/ABS enclosures at production volume. Per-part economics become favorable once a project passes the 500-unit mark because the fixed mold cost is divided across more parts. Below that threshold, CNC machining or sheet metal subassemblies often avoid uneconomic tooling." "Aluminum also supports die casting and extrusion for higher-volume or geometrically complex housings. Die casting supports high-volume metal production above roughly 5,000 pieces in aluminum or zinc but must contend with porosity, shrinkage and post-machining requirements."
- BSUMwell, "Plastic Casing Vs. Metal Casing: A Complete Comparative Analysis of B2B Procurement"
What we used
"An EPC contractor used ordinary ABS plastic casing in a coastal photovoltaic project to reduce BOM costs. As a result, in less than two years, the plastic severely powdered and cracked due to the combined effects of high-intensity ultraviolet radiation and salt spray, and rainwater backflow burned out the internal inverter. The initial 30% savings in the procurement budget led to tens of thousands of dollars in equipment damage claims." "Selection Recommendation Summary: Coastal/Chemical → Stainless steel (316); Outdoor environment → PC/ABS plastic (UV resistant); High-heat equipment → Aluminum casing." "PC/ABS plastic | 1x (benchmark) | Injection molding, lowest unit price for bulk orders. Aluminum casing | Approximately 1.5-2 times | Aluminum profiles/die casting, medium cost. Stainless steel | Approximately 2-3 times | The highest cost is for materials and processing." "PC/ABS plastic | 1x (lightest) | The frame has minimal load-bearing requirements and can be moved by a single person. Aluminum casing | Approximately 1.5 times | Lightweight, suitable for pole/high-altitude installation. Stainless steel | Approximately 3 times | The support structure needs to be reinforced, which may require hoisting equipment." "Stainless steel | strongest | Coastal, chemical, offshore | 20 years or more."
- BSUMwell, "TCO Analysis: Plastic vs Stainless Steel vs Aluminum Enclosure, 10-Year Cost Comparison"
What we used
"Plastic casings are 30% cheaper than stainless steel casings. A project using 200 casings saved nearly 10,000 yuan. Two years later, more than half of the 200 plastic casings showed severe powdering and cracking. Rainwater seeped in through the cracks, burning out the internal inverters. The claims, replacements, and downtime losses combined amounted to the small amount of money saved on the initial purchase price several times." "Stainless steel requires virtually no maintenance. Aluminum requires regular coating checks. Plastic cannot be repaired once it ages; it must be replaced." "The initial procurement cost is just the tip of the iceberg. In harsh environments, replacement costs and hidden costs are often several times the initial price difference."
- BSUMwell, "Scenario-Based Enclosure Material Selection, Coastal, Chemical, Solar, EV Charging"
What we used
"PC/ABS plastic shells can last 10-15 years in normal outdoor environments, but in the organic solvent vapor environment of chemical plants, they may stress crack after 6 months." "316 stainless steel is the first choice; aluminum requires a recoating. 316 stainless steel | Containing molybdenum, it has the strongest resistance to chloride ion corrosion and requires no maintenance for over 20 years. 304 stainless steel | Suitable for areas more than 2 kilometers from the coastline. Aluminum casing | Requires marine-grade recoating (≥120μm); take precautions against scratches during installation. PC/ABS plastic | Requires a high-level UV protection formula, suitable for areas more than 5 kilometers from the coastline." "Pitfall 1: Replacing UV-resistant PC with ordinary ABS. Coastal environments will cause the material to crumble and crack within 1-2 years." "Plastic: Lightweight (50% lighter than metal), low cost, temperature tolerance (-20℃ to +80℃). Stainless Steel: 316L grade resists salt spray for 5000+ hours. Aluminum: Balanced strength and weight, powder-coating ensures 10+ years of anti-rust performance."
- Bud Industries, "FAQs"
What we used
"Steel, Typically can be used in indoor or outdoor environments. It is corrosion resistant if powder coated or has a chemical conversion applied. Will absorb and conduct heat. Metal will dissipate heat better than non-metallic enclosures. Stainless Steel, The corrosion resistance comes from nickel composition. Die-cast aluminum, when molded it can be impact resistant. Fiberglass, high impact strength and rigidity and has superior working temperature (-31 degrees F to 300 degrees F.) Good moisture and chemical resistance. Tends to be more expensive than polycarbonate but less expensive than other corrosion resistant boxes. Polycarbonate (PC) plastic, Higher performance thermoplastic (injection molding.) The temperature range is less than fiberglass. It can be formulated to offer fire retention or UV stability and offers superior insulation. This can be offered in a clear material and is corrosion resistant. Polycarbonate objects weight less. If a polycarbonate object weighs 1 pound, a similar fiberglass would weigh about 1.5 pounds, aluminum 2 pounds, and steel 6 to 7 pounds." "Bud's enclosures are only truly UL rated when they are in the original designated form. Any additional cutouts or shifts in material could cause you to have to recertify the product." "Bud offers our products through a large network of distributors... More than 90 percent of Bud's products are available for same-day shipment." "Industry-leading 5-Day Modifications Program for basic modifications." Die-cast aluminium: ADC-12. Aluminium chassis, panels, rackmounts: 3003-H14
- Bud Industries, PU Series NEMA 6P/IP68 PC Enclosure, "Rated to NEMA 4X & 6P and Meets IP66 & IP68 requirements. UL Listed to UL 508A. Molded from durable, UV stabilized polycarbonate UL94 V0 rated. Continuous silicone rubber gasket is pre-installed to ensure watertight seal. Stainless steel screws and brass inserts for cover assembling."
- Lansing Enclosures, "Electronic Enclosure Material Selection Guide"
What we used
Aluminium: high strength-to-weight ratio ideal for lightweight applications; superior thermal conductivity aiding in heat dissipation; corrosion resistance, particularly when anodized or coated; intrinsic EMI shielding properties, crucial for sensitive electronics; easily machined and fabricated into complex shapes. Stainless steel: exceptional mechanical strength and impact resistance; high resistance to oxidation, corrosion, and chemical exposure; heavier than aluminium; inferior thermal conductivity compared to aluminium, making heat dissipation a challenge. Carbon steel: high structural strength at a lower cost compared to stainless steel and aluminium; can be galvanized or powder-coated; prone to rusting; heavier than aluminium. Plastics (ABS, polycarbonate, fibreglass): lightweight, reducing overall system mass and easing transport
- DigiKey, "Enclosure Material Considerations"
What we used
"Non-metallics are permeable by radio frequency (RF) waves and make a good choice for wireless communication devices that need to easily send and receive signals. On the other side of the coin, this feature can be detrimental if the device needs to be kept isolated from electromagnetic interference (EMI) and radio frequency interference (RFI)." "ABS is the favored plastic for indoor use... offers good impact resistance, heat resistance, and versatility. While general purpose ABS (GPABS) is the most economical type, flame retardant ABS (FRABS) is also available and provides a medium-high level of flame retardance (UL 94V-0)." "Polycarbonate is the rockstar of the plastic world. Offering superior impact resistance, a wide operating temperature range, and resistance to UV damage, it is the chosen plastic for many outdoor, high-impact, and marine applications." "Metal-to-metal contact is essential for full shielding as well as grounding."
- Polycase, "Electrical & Electronics Enclosure Selection Guide for Engineers and OEMs"
What we used
"Polycarbonate and ABS are widely used thermoplastics for electronic housings, but their properties make them suitable for different applications. Impact resistance: Polycarbonate excellent, ABS moderate. Outdoor suitability: UV-stabilized polycarbonate grades can support prolonged sun exposure; standard ABS grades are generally better suited to indoor use. Cost: Polycarbonate often higher, premium costs; ABS generally economical." "Metal enclosures may be appropriate when an application requires thermal conductivity, premium strength, or electromagnetic interference (EMI) shielding. Aluminum offers relatively low weight and good thermal conductivity. Steel and stainless steel provide durable construction for industrial applications. However, metal construction introduces additional design considerations, including grounding, corrosion protection, and wireless signal performance."
- Design News, "Insert tooling speeds semi-custom enclosure design" (PacTec)
What we used
"Research showed that tooling for a fully custom injection-molded enclosure would cost around $50,000 and take months to validate, more time and money than they wanted to spend. Instead, the company turned to a modified standard enclosure that cost less than $5,000 and was ready for production in just 10.50 weeks."
- Inventornest, "Hardware Product Development Company"
What we used
(published US industry estimates, checked November 2026), "Injection mold tooling: $3,000 to $15,000 for aluminum; $20,000 to $100,000 or more for steel. Tool samples 4 to 8 weeks after design sign-off."
- Central Coast Enclosures, worked example, "First Order · 1,000 Units. Mold tooling $3,500. Parts · $1.75 × 1,000 $1,750. Total $5,250. $5.25 Each. Repeat Order · 1,000 Units. Setup fee $500. Parts · $1.75 × 1,000 $1,750. Total $2,250. $2.25 Each. Illustrative example only."
- Demo arithmetic verified in Python before writing: shell surface area 2(100×60 + 100×40 + 60×40) = 24,800 mm²
What we used
= 248 cm²; shell volume at 2 mm wall = 49.6 cm³; PC (1.2 g/cm³, article's own assumption) = 59.5 g, aluminium (2.7) = 133.9 g, steel (7.85) = 389.4 g; ratios aluminium 2.25×, steel 6.54× (Bud: 2× and 6–7×); fleet of 1,000: PC 60 kg, aluminium 134 kg, steel 389 kg, steel−PC = 330 kg; wall conduction drop at 5 W, 2 mm wall, 0.0248 m²: PC (k = 0.2, article's own assumption) = 2.016 °C, stainless (k = 16, Fabcon) = 0.025 °C, aluminium (k = 167, Fabcon) = 0.002 °C; Izod midpoints PC 750 J/m vs ABS 300 J/m = 2.5×, range 1.5–4.5×; cost at $10 PC enclosure (article's own assumption): fleet of 1,000 PC/ABS $10,000, aluminium $15,000–$20,000, stainless $20,000–$30,000; 30% saving = $3,000; at the coastal case's failure rate, 500+ of 1,000 fail, replacement enclosures alone $5,000; tooling $10,000: $100/hub at 100 units, $10 at 1,000, $1 at 10,000; $3,500: $35 / $3.50 / $0.35; $50,000: $500 / $50 / $5