Menu

Senova POS point-of-sale devices

Three card-payment devices built as one family: a countertop register, a handheld and a pocket reader.

Pre-prototype design

Senova POS is a family of three devices for shops and restaurants. The Station is a countertop register with a 15.6-inch screen for staff, an 8-inch screen facing the customer and a built-in receipt printer. The Go is a handheld with a 6.5-inch screen, its own printer and a battery you can swap without switching it off. The Link is a pocket card reader that plugs into a phone or pairs with it over Bluetooth.

All three are designed to take chip, tap (including phone wallets) and swipe through the same pre-certified card reader module, so card numbers never pass through our own electronics.

This is a design, not a product on sale. Two of its four circuit boards are ready to manufacture and the other two are being finished. No prototypes have been built yet, and it has not been through payment or radio certification.

Specifications

Station screens
15.6" for staff, 8" facing the customer
Station printer
80 mm receipts, with a cutter
Station on a power cut
Battery keeps it running for at least 15 minutes
Go
6.5" handheld with a 58 mm printer
Go battery
Swappable while on; a 12-hour shift per pack
Link
Plugs into a phone over USB-C, or pairs over Bluetooth
Cards
Chip, tap and swipe, through a pre-certified reader module
Circuit boards
4 (two ready to manufacture)

Design targets from the Senova POS specification, not measured results. Nothing here has been certified yet.

Designed in-house. The design is proprietary to Senova Systems and is not open source.

Try the screens

Click through the screens staff and customers would use on the Station, the Go and the Link: taking an order, charging a card, tipping, splitting a check. It runs in your browser with sample data and takes no real payments.