Blaide desktop circuit-board printer
Prints silver-ink circuits, mills and laser-exposes copper boards, and dispenses paste, with one tool-changing head.

Blaide is a desktop machine for making prototype circuit boards. One head changes between two dispensers, a spindle and a 405 nm UV laser on its own, so a board can be printed in silver ink, milled from copper, exposed with the laser, or made with a mix of these.
Boards up to 150 x 110 mm sit in a tool-less corner holder. On the machine there is just a light line and one button; jobs are set up in an app that runs in the browser and reaches the machine over Wi-Fi.
Nothing has been built yet. Everything that can be checked without hardware has been: its controller and front boards, and the boards for two add-on tools, pass KiCad's design rule check, circuit simulations cover the light-line supply, the pump and heater switches and the input protection, the firmware passes 113 desktop checks and compiles for the controller chip, and the app prototype runs a full simulated job. The design verification report lists every result, including the changes it calls for. The carriage board, the Wi-Fi firmware and a trial with real ink are still to do, and the safety design for the laser and spindle needs a review before the machine could be sold.
Specifications
- Size
- 400 x 460 x 330 mm
- Weight
- 16 kg (from the CAD model)
- Board area
- 150 x 110 mm
- Travel X / Y / Z
- 194 / 188 / 45 mm
- Positioning accuracy
- 0.1 mm target (0.072 mm estimated)
- Minimum trace / gap
- 0.20 / 0.20 mm printed or milled; 0.10 / 0.10 mm laser-exposed
- Printed layers
- Up to 4, with a printed dielectric
- Tools
- Two dispensers, spindle, 405 nm UV laser, automatic tool change
- Processes
- Printed silver multilayer, milled copper, UV-exposed copper, hybrid
- Bed
- 200 W heater, up to 245 °C
- Controller
- STM32G0, four stepper drivers, four-layer board
- Connectivity
- Wi-Fi; the app runs in the browser
- On the machine
- One light line and one button
Design targets from the Blaide design package (Rev C), not measured results. Nothing has been built or tested yet.
Designed in-house. The design is proprietary to Senova Systems and is not open source.
Documents
These documents describe a design that has not been built or tested. Every number in them is a design target, not a measured result, and every picture is a render.
All hardware documents- DatasheetSpecification: what it is designed to do, with its design targets and limits.
- How it worksTheory of operation, in plain terms.
- User manual, draftSetting it up and using it.
- Design verification reportEvery check made on the design so far, and what it found.
The Blaide line
Add-ons, supplies and a larger machine, designed around the printer. Like the printer, all of it is design work: nothing has been built or tested, the numbers are design targets, and the pictures are renders.


Pro machine
A larger printer with a 300 x 200 mm board area that uses the same tools, cartridges, boards and app.

Ink and paste cartridges
Keyed cartridges the machine reads, so it sets flow and cure itself. Other inks are not locked out.

Blank packs
Boards that drop into the corner holder with no trimming, and a carrier that holds flexible film flat.

Solder mask kit
Covers traces and leaves every pad open, using the dispenser and 405 nm laser already on the machine.

Via kit
Two-sided boards without rivets or wire links, with a test coupon to prove a batch before a real board.

Probe tool
Finds opens and shorts on a bare board before parts go on, with one probe and no fixture.

Pick-and-place head
Places 0402 to SOIC parts from a tray, knows when a pick failed, and fits a dock position.

Wear packs
Replacement bits and nozzles. The machine tracks wear and tells you before a worn part spoils a board.

Antenna and flex pack
Prints a 13.56 MHz NFC tag on film in three layers, tuned by measuring it on the ZA-1.
Education pack
Five printers with a shared job queue and eight lessons, each built around a board from the design package.
Turn it round
The CAD model of Blaide, Rev C. Drag to turn it round, and use the slider to lift off the lid and shell and see the gantry, the four tools in their dock and the bed underneath.

Try the screens
Click through the five steps of a print job in the app that drives Blaide. It runs in your browser with a simulated machine and sample board; nothing connects to a real printer.