Blaideapp prototype · Rev CReady
  1. 1 Import
  2. 2 Check
  3. 3 Load
  4. 4 Print
  5. 5 Finish

Open a design

Or start with the sample

LED blinker, 40 × 30 mm, two printed layers. The first board every new machine prints.

Board

Design check

    Checks and toolpaths are worked out here in your browser. The printer only runs motion, so there is no computer inside it to boot or update.

    Copies

    Load the machine

      Each item ticks itself when the machine senses it. In this prototype, tap an item to simulate the sensor.

      Printing

      Time left–
      Bed25 °C
      Tool–
      Ink used0 mg

      Board finished